*** EXCLUSIVE PRE-ORDER OFFER ***

Finally, a high-end "Mini" Titanium Carabiner...

"Who Else Wants Access To
The
"Mini" Titanium Carabiner
Customers
DEMANDED I Make?"

The Titanium Carabiner No One Else DARED To Make

Precision Machined From Grade 5 Titanium

From: Magnus Macdonald, MagnusX.com

Dear Friend,

If you've been looking for an ULTRA-COMPACT Titanium carabiner, then you've just found it!

Now, the truth is:

I've designed and made this new Titanium carabiner because previous Customers have been asking, pleading and begging me to make it.

The Titanium carabiner I'm about to reveal to you is a "Mini" version of the ultra-high-end Titanium carabiner I released last year on the crowdfunding platform Kickstarter (I called this Titanium carabiner the McDangle™).
Long story short:

Although the McDangle™ was MASSIVELY popular ...I still had non-stop messages, comments and emails from people asking me to make a smaller version.

So, after investing in a new cnc-machine, I've taken the time to design and develop a new version of this Titanium carabiner which I'm calling the McDangle™  "Mini".
Although this new, ultra-compact McDangle™ "Mini" is smaller than the original ...it is identical in every other way (it's essentially just a scaled-down version!).

Here's the new "Mini" version next to the original, larger McDangle™ so you can see the difference in size:
Now here's the thing...

Because this new McDangle™ "Mini"  is virtually identical to the original version - it boasts the same never-before-seen design features as the original version.

If you scroll down I'm going to take the time to highlight and explain some of the unique features of the McDangle™ "Mini".

NOTE: You'll see photos of both the original large McDangle™ and the new, McDangle™ "Mini"  below (I've done this because it is easier to see the important "little details" on the larger version - but, just to repeat, both sizes are almost identical in design).

How the McDangle™ started (quick story!)...

Over the years I've bought a number of carabiners (many of them from Kickstarter) - but I've never been 100% happy with any of them.

The biggest "issue" I found was that, while a few of the carabiners I've owned looked great, this was usually at the expense of functionality (almost always there would be "side play" in the gate part of the carabiner).

After a lot of development, testing and tweaking I managed to come up with a design which should be the last carabiner I ever need.

Let's get straight into the details of the McDangle™ "Mini"...
Grade 5 Titanium
If you're familiar with my work, then you'll know I only produce products from Grade 5 Titanium. I do this because I make things with the aim of them lasting ...literally forever!

I'm not sure if you know this, but...

Grade 5 Titanium specifically has around 30% more "elasticity" than, say, ordinary steel (and some other titanium grades as well) and this is absolutely critical to the "spring" function of the gate of the McDangle™ "Mini" .

To put it another way... only Grade 5 Titanium has the specific properties required to allow the gate of the McDangle™"Mini" to function as it does.

Did I mention that Grade 5 Titanium is 100% corrosion resistant (actually, it's pretty much everything resistant!).
Precision CNC Machined
The McDangle™"Mini" will be entirely precision cnc-machined on a Japanese-made CNC milling machine. This is critical for the ultra-tight tolerances between the gate and the body.
Ultra-Secure 'Gate'
One of the criteria the McDangle™ "Mini" had to meet was to have absolutely no risk of it accidentally opening and slipping off whatever it is attached to.

I achieved this by doing two things in the design:

#1 - I've made sure the spring in the gate is strong.
#2 - Where the gate meets the body I have ensured there is a smooth "arcing" - a smooth flow of the design lines. Not only that but I have also ensured that where the gate meets the body it is 100% flush - there is no "step" between the two components.
These two design elements GUARANTEE the McDangle™ "Mini" can never accidentally become un-clipped.
No Screws
You've no doubt noticed there are no screws or such holding the gate into the body. And, quite possibly, you're thinking, "Magnus, how does the gate not fall out?"

Quite simple really...

I've machined a "shoulder" into the body of the McDangle™ "Mini" ...and there is a "groove" in the gate that allows it to slip onto this shoulder:
As you can see in the photo above... whether the gate is open or closed on the McDangle™"Mini" - it's physically impossible for the gate to come off. It's not going anywhere!
Smooth Action
One thing I wanted to make sure the McDangle™"Mini" had was a smooth, working action - this was critical (there is nothing worse than something with a "gritty" feel to it!)

The movement of the gate of the McDangle™"Mini" is very smooth because of the precision cnc-machining we do to it ...and also due to the tumbling/finishing process it goes through. This combination of things ensure the action of the gate is buttery smooth!

NOTE: The image below is of the large McDangle™ (NOT the "Mini" version)
Proprietary Surface Finish
As with all my titanium products... the McDangle™"Mini" is going to get my one-of-a-kind surface finish.

The finish has a matte look that is somewhat (but not completely) resistant to scratches. But, hey, the McDangle™ "Mini" is design to be used and abused!
Two Versions Available
I've made two versions of the McDangle™ "Mini":

The Standard Version and the Loop Version...
Dimensions
The McDangle™"Mini" is 6mm thick (around 0.25").

Length: 50mm (2.00")
Width: 27mm (1.05")

Note: The "hole" at the bottom of the Loop Version is 3mm x 9.5mm (0.12" x 0.38").
Now, I will be up-front and honest with you here...

If you're on-board for this EXCLUSIVE PRE-ORDER, then it's going to be a few weeks until your McDangle™ "Mini" ships (but it will be worth the wait - I promise!). Production will start in the middle of July and shipping will be towards the end of July.

The reason for the slight delay is that I'm going to be using our NEW CNC milling machine (which has been in the workshop for barely a week) ...and so we're just starting to ramp up production on it.

This is good news for you because I've got some great deals below as a "thank you" for your patience...

McDangle™ "Mini" (Standard Version)

YES! I'm Ready To Pre-Order
My McDangle™ "Mini"
(Standard Version)

By clicking the ORDER NOW button below I'm going to be
getting the McDangle™ "Mini" (Standard Version) RIGHT NOW!

McDangle™ "Mini" (Standard Version) Just:

$99.00

McDangle™ "Mini" (Loop Version)

YES! I'm Ready To Pre-Order
My McDangle™ "Mini"
(Loop Version)

By clicking the ORDER NOW button below I'm going to be
getting the McDangle™ "Mini" (Loop Version) RIGHT NOW!

McDangle™ "Mini" (Loop Version) Just:

$99.00
I'm nearly done - but first...

Do you recall earlier I mentioned I've just invested in a new CNC milling machine?

This new machine will be able to produce our high-end titanium parts both BETTER and FASTER than before.

And here's where it gets good for you:

I'm giving you an EXCLUSIVE OFFER only right now. Order any two McDangle™ "Minis" for the super-low price of just $129 for both (basically you're getting the second one for less than it costs me to make it - seriously).

This deal is available to you because this new milling machine will be faster than my old machine ...and I'd like to pass this onto you since your McDangle™ "Minis" will be one of the first products off the machine!

I'm calling this deal the "Double Down":

*** EXCLUSIVE "Double Down" DEAL ***

YES! I'm Ready To Pre-Order
My 2 x McDangle™ "Minis"
(Standard Version)

By clicking the ORDER NOW button below I'm going to be
getting 2 x  McDangle™ "Minis" (Standard Version) RIGHT NOW!

2 x McDangle™ "Minis" (Standard Version) Just:

$129.00

*** EXCLUSIVE "Double Down" DEAL ***

YES! I'm Ready To Pre-Order
My 2 x McDangle™ "Minis"
(Loop Version)

By clicking the ORDER NOW button below I'm going to be
getting 2 x  McDangle™ "Minis" (Loop Version) RIGHT NOW!

2 x McDangle™ "Minis" (Loop Version) Just:

$129.00

*** EXCLUSIVE "Double Down" DEAL ***

YES! I'm Ready To Pre-Order
My 2 x McDangle™ "Minis"
(1 x Standard + 1 x Loop Version)

By clicking the ORDER NOW button below
I'm going to be getting:
1 x  McDangle™ "Mini" (Standard Version)
and
1 x McDangle™ "Mini" (Loop Version)

2 x McDangle™ "Minis"
(1 x Standard + 1 x Loop Version) Just:

$129.00

To impossibly high standards,

Magnus

P.S. Remember, the deals above are only available RIGHT NOW and will unlikely to ever be available again at this price. Grab yours by clicking the "Order Now" button above on the EXCLUSIVE DEAL that works best for you!

FAQs

When Will My McDangle™ "Minis" Ship?

Production will start mid-July and your McDangle™ "Minis" will ship towards the end of July.

Do You Make These Yourself?

Yes, of course! From importing the raw titanium to here in New Zealand ...all the way through to CNC machining ...and on to the final surface finishing process ...it's all done 100% in my workshop.

Can I See The New CNC Machine You Mentioned?

Sure thing. Here it is having just been install a week or so ago...

Magnus © 2019, All Rights Reserved.
Mount Maunganui, New Zealand