*** In Stock - Shipping Right Now ***


Finally, a high-performance titanium spinner...

"Who Else Wants Access To My

MOST POPULAR Titanium Spinner?"

This Is The Titanium Spinner I've Been Asked For More Than Any Other.
I've Had People Begging, Demanding And Saying They 
Will "Pay ANY Price!" For It.

From: Magnus Macdonald, MagnusX.com

Dear Friend,

If you're looking for a one-of-a-kind, performance titanium spinner - then you're on the right page!

In March 2017 I uploaded a video where I showed the making of a prototype titanium spinner - this one circled below:

Since I uploaded that video I've been asked over and over again via email, Instagram, Facebook, etc. about when I would be making this particular design.

Well... I've finally given in and I'm making it now.

Before we get straight into this new spinner - I'd like to give you a little background on me just to show you I'm not "blowing smoke".

Over the last year or so, I've been prototyping spinners like some sort of mad genius. I showed some of these spinners on YouTube and, well, people started going crazy for them. Here's what I'm talking about...

There have been literally millions of views of my spinner videos.

So far I've only manufactured and shipped two spinner designs - this will be my third one.

As with my previous spinners - this new design must meet my ultra-strict criteria:

  • Multiple finger "flicking" (this spinner had to be able to be flicked easily with index, middle or ring fingers)
  • Fowards and backwards flicking (as well as being able to flick with multiple fingers, this spinner had to be easily flicked both forwards and backwards)
  • "End" flicking (one criteria, that's a "must have" for me personally, is to be able to both flick and catch the spinner on the very ends of the spinner-arms!)
  • ​Ultra-ergonomic buttons (for me this is a complete "no brainer"... the buttons need to "hug" your finger so you can focus on flicking... and not trying to figure out how to grip the damn thing... too many spinners have buttons that only look good!)
  • ​"Table spin" (while this spinner is designed for fidgeting in-the-hand... I personally love flicking a spinner on my desk and having it spin on its own for a few minutes... I had to be able to do this with the spinner!)
  • Capable of fast spinning (if a spinner is too heavy then it's not going to spin fast... regardless of how skilled or strong your fingers are. The spinner had to bridge that fine balance between too light and too heavy... which is just one of the reasons for using titanium!)
  • ​Quick, easy and simple button retention (I've been frustrated in the past with screw-together buttons coming undone... and using magnets is just not my thing. I've invented a button retaining mechanism which has not been done before.)
  • ​Easy bearing change (this is a performance spinner, so it's likely you'll want to test and try different bearings to further tweak this spinner for you... so I've used a clever bearing retention system that makes it quick and easy to switch bearings)
  • ​No "hot spots" (I didn't invent this term... but it's a great way to describe any sharp edges or corners that make spinning uncomfortable. The spinner had to have absolutely no hot spots!)
  • ​Perfectly balanced (this sounds obvious... but I've bought many "big name" expensive spinners that were unbalanced. Even a tiny wobble is frustrating... and so this spinner had to be perfectly balanced!)

On the topic of balance and precision:

I will be making this exclusive spinner right here where I live in New Zealand. The machining will be done in my machinist's workshop where we specifically use Japanese-made machines.

The Japanese make, undeniably, the highest precision machining equipment in the world. This is why we use Japanese machines.

This spinner will be made on the following Okuma CNC-lathe and Kitamura CNC-milling machine.

Right, enough talking, let's just get to the spinner - I present to you the ultra high-performance titanium spinner I call the Hubris...

Let's talk size and weight...

This is a very compact performance spinner. The distance from the center to the outer arms is around 21mm (or a bit under 1-inch).

The Hubrisspinner will be around 13mm (or just over 0.5") thick.

The total weight of this spinner -- including buttons and bearings -- will be around 50 grams (or roughly 1.75 oz.).

The button size is a solid 21mm (0.8") in diameter.

The Hubris™ is a spinner that's designed for SERIOUS fidgeting. Even though the spinner looks damn good (which is certainly part of the appeal) ...it's really designed for pure fidgeting (just like my previous two spinners).

While I may be somewhat new to designing and making spinners - I've been designing and making various high-end titanium products for many years now.

Here is just some of the feedback I receive all the time from Customers about my high-end products...

One last thing...

Remember you're also going to be getting my personal 100% Unconditional Money-Back Guarantee.

If you find your Hubris™ spinner is just not for you, then let me know and I’ll give you back your money. No questions asked.

In fact, I can do even better for you...

Use your Hubris™ spinner for as long as you like. Test it for a day, a week and month, or even a year. And, if your experience of using your Hubris™ spinner doesn't have you screaming with delight... you can return it to me at any time. And I'll refund the entire amount to you.


YES! I'm ready to Order
My Spinner RIGHT NOW...

When I click the order button below I understand I'm going to be getting:
  • The most requested spinner made by Magnus and designed for pure performance and maximum "fidgetability"
  • The lowest price this will ever be (and that's even if Magnus makes it again)
  • High-performance bearings to match this high-performance spinner
  • A 100% Unconditional Money-Back Guarantee (if I decide this spinner is not for me at any point, before or after I receive it, then Magnus will cheerfully refund my money. Absolutely no questions asked.)
I'm getting the Hubris spinner for just USD$149.
I am clicking the order button below to "lock in" and guarantee I get myHubris spinner right now:

To impossibly high standards,

Magnus

P.S. Remember... you're getting the ultimate, high-end spinner designed 100% for performance and "fidgetability".

​P.P.S. One last thing... you’re also going to be getting my 100% Risk-Free Unconditional LIFETIME Guarantee! If you're not absolutely blown-away by your Hubris spinner when you first pick it up ...then simply let me know and I will refund you every single penny you paid. No questions asked.

FAQs

Can I order more than one Hubris™ spinner?

Yes, you can. I do encourage this because the Hubrisspinner will never be this cheap ....EVER!


Can the Hubris™ spinner "table spin" (i.e. spin on a flat surface)?

Yes - for sure! This was one of my strict criteria. Even though the Hubris spinner has low-profile buttons ...you can still spin it on flat surfaces.


What size bearings does the Hubris™ Spinner use?

This is a dual-bearing design (i.e. it takes two bearings). I use the most popular R188 size bearing. This gives you a huge range of bearings to choose from if you want to further "tweak" your spinning experience.


Shouldn't the weight be distributed to the outside of the spinner?

The short answer is: No

The long answer is:

It depends what you're trying to achieve. If you're trying to design a spinner with a long spin-time AND reduce the weight as much as you can - then, yes, you want to distribute weight to the outside.

With the Hubris spinner I'm not trying to achieve the longest possible spin-time ...and I'm not trying to reduce weight either.

The core criteria for this spinner is "fidgetability" (i.e. being able to spin it with different fingers in different ways, being able to stop it mid-spin, feeling ultra-comfortable in the hand, and so on...) ...not spin-time.

Because the Hubrisspinner is made from titanium it's already at a fairly optimal weight for the design criteria I had. There was no need for me to "shave of" material to make it lighter.


How long will I have to wait for my spinner?

I have some in stock and so I can ship you one right now.


What weight is the Hubris™ spinner?

The final production weight -- including the bearing and buttons -- will be around 50 grams (or roughly 1.75 oz.)


How big is the Hubris™ spinner?

The distance from the center of the button to the outer arms is around 21mm (or just under 1").

It is around 13mm (just over 0.5") thick.


What is the "spin time" (i.e. how long will it spin for)?

The Hubris™ does not have a hugely long spin time because it is so light weight.

But here's the thing... the Hubris spinner is not about spin-time. While spin-time does help prove how easily a spinner can spin. The Hubris spinner is more about starting and stopping when you're flicking it around ...and not just letting it spin for minutes at a time.


Why do you offer a lifetime money-back guarantee?

I offer this on all my high-end products (pens, mechanical pencils, tweezers, carabiners etc.) I stand by my products and I stand by you... forever.

​MagnusX.com © 2018, All Rights Reserved.
Mount Maunganui, New Zealand